Hot Tub Delivery and Installation
When you buy a Bullfrog Spa, our Oklahoma City service team will deliver and install your hot tub for you. You are responsible for hiring a licensed electrician to direct wire the connection.
Hot Tub Delivery Basics
To prepare for the delivery of your hot tub, make sure the delivery path is clear and no obstructions are present. Obstacles such as overhanging tree limbs, awnings, protruding gas meters, water meters, and A/C units can prevent easy access. It may be necessary to remove a gate, part of a fence, or other items in order to dolly the spa to the desired location. If there are more than six consecutive stairs without a landing, you may be required to find another delivery path. Check the measurements on 90◦ turns to make sure the spa will fit through. Occasionally a crane is required to install the spa by lifting it to its final destination. This occurs when the spa has to be taken off of the dolly cart to go over a wall, either because the entry area is too narrow, the eaves are too low, the corner is too tight, or the stairway is too steep. The use of a crane is a common practice and is usually the easiest and safest method for moving a spa when access is difficult. The crane has a truck-mounted boom and can fit easily in your driveway. The Crane Operator will lift your spa over walls, buildings, or any other obstruction and place it as close to the installation site as possible. If a crane is needed there will additional charges to cover the cost.
A – Make sure that overhanging tree limbs, awnings, gas meters and A/C units do not prevent easy access.
B – Check to see how high your power lines are from the ground. Make sure that it is safe for the delivery.
C – It may be necessary to remove parts of fences, gates or other items
D – Check the measurements on 90◦ turns to make sure the spa will fit through.
E – If there are more than six consecutive stairs without a landing, you may be required to find another delivery path.